Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
4. Assemble Piston Pin Remover/Replacer T68P-6135-A 1 (part of T68P-6135-A), Piston Pin Remover/Replacer T71P-6135-P1 (part of
T71P-6135-P) and Piston Pin Remover/Replacer T81P-6135-A1 (part of T81P-6135-A) and set the piston assembly over T81P-6135-A1 (part of
T81P-6135-A).
5. Apply a light coat of engine oil to all parts.
6. Start the piston pin in the piston and connecting rod (this may require a very light tap with a mallet). Use an arbor press and Piston Pin
Remover/Replacer T81P-6135-A2 (Part of T81P-6135-A) to press the piston pin through the piston, pin and ring until the piston pin is
NOTE: Ensure the "W" mark on the piston and the connecting rod are on the same side before assembly.
