Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Temperature Control - Manual Control System
Temperature control of the heating and defrosting system is determined by the position of the temperature control knob. Cooler temperatures are
achieved by rotating the knob counterclockwise and warmer temperatures are achieved by rotating the knob clockwise.
Temperature Control - Electronic Control System
Temperature control of the electronic heating and defrosting system is determined by the TEMP button. Depressing the button will show and set
selected temperature in the display window. Push the left side of the button to lower the temperature setting. Push the right side of the button to
raise the temperature.
The manual setting of the temperature controls the position of the temperature blend door. The temperature blend door controls how much of the
air circulating through the system passes through the heater core and how much goes around it. Increasing the air flowing over the heater core
increases air temperature. Decreasing the air supplied to the heater core decreases the temperature.
Blower Motor Control - Manual Control System
The position of the blower motor control knob determines the speed at which the blower motor operates. Each position of the blower motor
control knob is detented for positive engagement. The blower motor control works in conjunction with the blower motor resistor to control the four
speed operation of the blower motor.
Blower Motor Control - Electronic Control System
The rotation of the blower motor control determines the speed of the blower motor. The blower motor control works in conjunction with the A/C
