Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
6. Remove the four climate control screws, and pull the climate control from the instrument panel.
7. Disconnect the five electrical connectors from the climate control assembly and remove the climate control assembly from the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
Climate Control Assembly Bulbs
NOTE: The climate control assembly illumination bulbs are referred to as miniature bulbs.
REMOVAL
1. Remove the climate control assembly.
2. Twist and pull the two climate control assembly miniature bulb sockets from the climate control assembly.
3. Pull to remove the two climate control assembly miniature bulbs from the sockets.
INSTALLATION
1. To install, reverse the removal procedure.
Climate Control Assembly Switch Knob(s)
The climate control assembly switch knobs are the blower motor control knob and the temperature control knob.
