Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Headlamp Control Module: Service and Repair
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
NOTE: The autolamp module is located to the right of the glove compartment and is mounted to the instrument panel support.
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the glove compartment.
3. Remove the autolamp module and bracket assembly nut.
4. Disconnect the autolamp module front electrical connector from the autolamp module.
INSTALLATION
1. To install, reverse the removal procedure.