Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Headlamp Switch: Service and Repair
Miniature Bulb
Headlamp Switch
REMOVAL
1. Disconnect the battery ground cable.
2. Pull the headlamp switch/autolamp (if equipped)/autolamp/light switch rheostat resistor assembly from the instrument panel finish panel.
3. Disconnect the headlamp switch electrical connector.
4. Disconnect the autolamp/light switch rheostat resistor assembly electrical connector.
5. Turn the headlamp switch miniature bulb counterclockwise and remove it from the headlamp switch.
INSTALLATION
1. To install, reverse the removal procedure.
Autolamp/Light Switch Rheostat Resistor
REMOVAL
1. Disconnect the battery ground cable.
2. Pull the headlamp switch/autolamp (if equipped)/autolamp/light switch rheostat resistor assembly from the instrument panel finish panel.
3. Disconnect the headlamp switch electrical connector.
4. Disconnect the autolamp/light switch rheostat resistor assembly electrical connector.
