Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Tail Lamp Relay: Testing and Inspection
1. Key OFF.
2. Remove the TAIL LAMP relay from the interior fuse junction panel.
3. Use a jumper to connect terminal 2 of the TAIL LAMP relay to the battery positive terminal.
4. Measure the resistance between terminals 3 and 5 under the following conditions.
Terminal 1
Resistance
Not connected
Greater than 10,000 ohms
Connected to the battery negative terminal
Less than 5 ohms
5. If the resistances are not as specified, replace the TAIL LAMP relay. Otherwise, return to the Pinpoint Tests. See: Headlamp/Testing and
Inspection/Component Tests and General Diagnostics/With Autolamp System/Pinpoint Tests