Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
^
Shown above are the required parts of Knuckle Puller T87C-1104-A.
Part 1 Of 2
Part 2 Of 2
2. Place Step Plate Adapter D80L-630-5 (part of D80L-630-A), or equivalent, on the front wheel bearing inner race and install Knuckle Puller
T87C-1104-A and Knuckle Puller Adapter T92P-1104-AH (part of T87C-1104-A) on the front wheel knuckle. Remove the front wheel hub and
front wheel bearing inner race as an assembly from the front wheel knuckle.
3. Remove the snap ring from the front wheel knuckle.