Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
EGR Control Solenoid: Service and Repair
REMOVAL
1. Disconnect the EGR vacuum regulator solenoid electrical connector.
2. Disconnect and mark the three EGR vacuum regulator solenoid vacuum hoses from the EGR vacuum regulator solenoid.
NOTE: The solenoid has a threaded stud and a 10mm nut that attaches the EGR vacuum regulator solenoid to the EGR vacuum regulator
solenoid bracket.
3. Remove the EGR vacuum regulator solenoid nut and the EGR vacuum regulator solenoid.
INSTALLATION
To install, reverse the removal procedure.