Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
PCV Valve Hose: Service and Repair
REMOVAL
1. Disconnect the main engine wiring harness clips from the breather tube brackets.
2. Remove the two ground wire bolts from the upper intake manifold and position the ground wires and main wiring harness aside.
3. Remove the two front breather tube bracket-to-upper intake manifold bolts.
4. Disconnect the front breather hose from the front valve cover.
5. Disconnect the breather hose from the air cleaner to intake manifold tube.
6. Disconnect the breather hose from the rear valve cover.
7. Remove the breather tube bolt from the water hose connection.
8. Remove the breather tube.
INSTALLATION
To install, reverse the removal procedure.