Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
INSTALLATION
1. To install, reverse the removal procedure.
CAUTION: Do not reuse the hose clamps; use new hose clamps to ensure proper sealing. Ensure that the hose clamps are beyond the bead and
centered on the sealing surface.
NOTE: Before installing the new hose, wipe both the engine and radiator fittings so they are clean and dry. Do not use engine coolant as a
lubricant. Coolant will prevent the hose from properly sealing to the fittings.
2. Fill the cooling system.