Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
2.
Open the fuel filler door. Inspect for gaps in the seam sealer as indicated in Figures 1 and 2.
3.
Clean the area to be sealed.
4.
Apply sealer to the area indicated in Figure 2.
5.
Verify the fuel filler cap 0-ring is properly sealing on the filler neck. The fuel filler cap has a pressure and vacuum valve. The pressure valve is
designed to release pressure above 17 kPa (2.5 psi).
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 97-14-17
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
972616A
Seal Gap
0.3 Hr.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
ODOR
68
OASIS CODES: 110000, 404000
