Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the Crankshaft Position (CKP) sensor heatshield retaining nut.
4. Remove the CKP sensor heatshield.
5. Disconnect the CKP sensor electrical connector.
6. Remove the CKP sensor retaining bolt.
7. Remove the CKP sensor.
INSTALLATION
To install, reverse the removal procedure.
-
Reconnect the battery ground cable