mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

PCM - High Idle Fluctuation/Stall/Exhaust Sulfur Odor|Page 4702 > < Engine Controls - General PCM Programming Procedures|Page 4697
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
PCM - High Idle Fluctuation/Stall/Exhaust Sulfur Odor

Article No.
98-13-16

07/06/98

^

IDLE - HIGH FLUCTUATION WHEN ENGINE IS COLD

^

LOSS OF ENGINE BRAKING - INTERMITTENT - 
WHEN COASTING DOWNHILL

^

STALL - WHILE MOVING GEARSHIFT LEVER FROM 
PARK TO REVERSE AND/OR DRIVE

^

EXHAUST - 3.0L - OBJECTIONABLE ODOR - 1997 
VILLAGER ONLY

LIGHT TRUCK:
1997-98 VILLAGER

This TSB article is being republished in its entirety to revise the Service Part numbers and part description.

ISSUE

Some 1997-98 Villagers may exhibit one or more of the following concerns:

^

Momentary loss of engine braking when coasting downhill

^

High idle fluctuation when engine is cold

^

Engine stalling when shifting from Park to Reverse or Drive

^

An objectionable sulfur-type odor from the exhaust under certain driving conditions - 1997 Villager Only

This may be caused by the programming within the Powertrain Control Module (PCM).

ACTION

Replace the PCM. The new PCM should reduce the possibility of the above concerns occurring. Refer to the Service Procedure for details.

SERVICE PROCEDURE

1.

Perform normal diagnostics.

2.

Replace the PCM with revised PCM. Refer to the Parts Block in this TSB article for application. Refer to the 1998 Villager Service Manual, Page
03-14-4, for replacement procedure.

3.

With the engine coolant temperature above 63° (145°F), perform the following Self-Learning Idle procedure:

NOTE

PCM - High Idle Fluctuation/Stall/Exhaust Sulfur Odor|Page 4702 > < Engine Controls - General PCM Programming Procedures|Page 4697