Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
4. Remove the SS assembly from the valve body. Discard all the O-rings.
INSTALLATION
1. Install new O-rings on the SS assembly.
2. Position the SS assembly on the main control valve body. Tighten valve body bolts a to 7-9 Nm (62-79 inch lbs.).
3. Install valve body bolts c. Tighten valve body bolts c to 7-9 Nm (62-79 inch lbs.).
4. Install the line pressure solenoid valve bolt. Tighten the line pressure solenoid bolt to 7-9 Nm (62-79 inch lbs.).
5. Install the main control valve body.