Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
5. Remove the four air bag diagnostic monitor bolts and the air bag diagnostic monitor.
6. Disconnect the air bag diagnostic monitor electrical connector.
7. Remove the air bag diagnostic monitor from the vehicle.
INSTALLATION
CAUTION: The air bag diagnostic monitor must be installed with the arrow marks pointing towards the front of the vehicle for proper operation.
1. To install, reverse the removal procedure.
2. Install new air bag diagnostic monitor bolts and tighten to 15-25 Nm (11-18 lb ft).
3. Verify that the air bag warning indicator is operative.
