Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
4. Remove the two third row rear safety belt retractor and tongue bolts.
5. Remove the third row rear safety belt retractor and tongue from the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
2. Tighten the two third row rear safety belt retractor and tongue bolts to 36-45 Nm (27-33 lb ft).
3. Tighten the third row rear safety belt retractor and tongue upper and lower anchor bolts to 36-45 Nm (27-33 lb ft).