Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Brake Switch (Cruise Control): Service and Repair
REMOVAL
1. Squeeze the brake on/off (BOO) switch electrical connector lock tabs to disconnect the BOO switch electrical connector.
2. Loosen the BOO switch locknut.
3. Remove the BOO switch.
INSTALLATION
1. Install the BOO switch.
2. Adjust the BOO switch height.
3. Tighten the BOO switch locknut to 12-15 N.m (9-11 Lb.Ft) .
4. Connect the BOO switch electrical connector.