Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Windshield Washer Switch: Testing and Inspection
Rear Wiper/Washer Switch
1. Key OFF.
2. Remove and disconnect the rear window wiper/washer switch located in the instrument panel.
3. Verify the resistance between the wire terminals at the rear window wiper/washer switch.
4. If the rear window wiper/washer switch tests OK, return to the Pinpoint Tests. See: Wiper and Washer Systems/Testing and Inspection/Pinpoint
Tests
Otherwise, replace the rear window wiper/washer switch.
