Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Power Steering Line/Hose: Service and Repair
Cooler Lines
REMOVAL
1. Place a drain pan under the steering gear.
2. Loosen the power steering reservoir return hose-to-power steering oil reservoir clamp.
3. Remove the power steering reservoir return hose from the power steering oil reservoir.
4. Loosen the intermediate line A-to-power steering reservoir return hose clamp.
5. Remove the power steering reservoir return hose from intermediate line A.
INSTALLATION
^
To install, reverse the removal procedure.
NOTE: Follow the start-up procedure. See: Power Steering Pump/Service and Repair/Power Steering Pump/Start Up Procedure After Power
Steering Pump or Gear Service
