Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
6. Position Bearing Puller Attachment D84L- 1123-A, or equivalent so as to support the front wheel bearing inner race. Place Step Plate Adapter
D80L-630-5 (part of D80L-630-A) on the front wheel hub. Use a press to remove the front wheel bearing inner race from the front wheel hub.
ASSEMBLY
1. Position Anti-Lock Sensing Ring Remover T85P-20202-A on the front disc brake rotor shield and Dust Shield Replacer T87C- 1175-B under the
front wheel knuckle. Press a new front disc brake rotor shield onto the front wheel knuckle.
2. Reassemble the front wheel bearing inner and outer races.
3. Support the front wheel knuckle and using Step Plate Adapter D80L-630-10 (part of D80L-630-A), press the front wheel bearing into the front
wheel knuckle.
4. Install the snap ring.
