Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Wheel Fastener: Service Precautions
WARNING: WHEEL HUB BOLT NUTS MUST BE RETIGHTENED TO PROPER TORQUE SPECIFICATION AT 160 KM (100 MILES)
AND ALSO AT 800 KM (500 MILES) OF NEW OPERATION AND AT THE INTERVALS SPECIFIED.
RETIGHTEN TO PROPER TORQUE SPECIFICATIONS AT 800 KM (500 MILES) AFTER ANY WHEEL CHANGE OR ANY OTHER
TIME THE WHEEL HUB BOLT NUTS HAVE BEEN LOOSENED.
IMPROPERLY TIGHTENED WHEEL HUB BOLT NUTS COULD ALLOW THE WHEEL TO COME OFF WHILE THE VEHICLE IS IN
MOTION, CAUSING LOSS OF CONTROL.
WARNING: REPLACE THE WHEELS IF THEY ARE BENT, CRACKED, LEAKING AIR OR HEAVILY RUSTED OR IF THE WHEEL
HUB BOLT NUTS OFTEN BECOME LOOSE. REPLACE WHEELS ONLY WITH NEW WHEELS. WHEELS THAT HAVE BEEN
STRAIGHTENED OR ARE LEAKING AIR OR ARE USED, MAY HAVE STRUCTURAL DAMAGE AND COULD FAIL WITHOUT
WARNING. CHECK FOR DAMAGE THAT COULD AFFECT THE RUNOUT OF THE WHEELS. WOBBLE OR SHIMMY WILL
EVENTUALLY DAMAGE THE FRONT WHEEL BEARINGS AND THE REAR WHEEL BEARINGS.
The lug nuts torque requirement specification is 98-118 Nm (72-87 ft. lbs.).
