Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Part 2 Of 2
2. Place Step Plate Adapter D80L-630-5 (part of D80L-630-A), or equivalent, on the front wheel bearing inner race and install Knuckle Puller
T87C-1104-A and Knuckle Puller Adapter T92P-1104-AH (part of T87C-1104-A) on the front wheel knuckle. Remove the front wheel hub and
front wheel bearing inner race as an assembly from the front wheel knuckle.
3. Remove the snap ring from the front wheel knuckle.
4. Place Step Plate Adapter D80L-630-10 (part of D80L-630-A), or equivalent, on the front wheel bearing outer race and press out the front wheel
bearing outer race from the front wheel knuckle.
5. With a suitable tool, pry the front disc brake rotor shield off the front wheel knuckle. Discard the front disc brake rotor shield.