Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
4. Install the O-rings to the second apply piston retainer.
NOTE: Apply transmission fluid to the O-rings prior to installation. Note the placement of the large and small O-rings.
5. Push the second apply piston assembly into the second apply piston retainer.
6. Install the D-ring to the fourth apply piston.
7. Install the O-rings to the fourth apply piston retainer.
NOTE: Apply transmission fluid to the O-rings prior to installation. Note the placement of the large and small O-rings.