Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
2. Use Push-Puller Set D80L-927-A and Bearing Pulling Attachment D84L-1123-A, or equivalents, to remove the idler gear bearing inner race.
3. Check the idler gear shaft for cracks, wear, or bending. Replace if necessary.
4. Check the idler gear for wear, chips or cracks. Replace if necessary.
5. Ensure the bearings roll freely and are free of noise, cracks, pitting and wear.
NOTE: When replacing the taper roller bearing, replace the inner and outer races as a set.
ASSEMBLY
1. Use a hydraulic press, drift, and Step Plate Adapter D80L-630-5 or equivalent, to press a new idler gear bearing inner race onto the idler gear.
