Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
14. Position the SS assembly on the main control valve body and install valve body bolts a and valve body bolts c. Tighten the valve body bolts to 7-9
Nm (62-79 inch lbs.).
15. Install the line pressure solenoid valve bolt. Tighten the line pressure solenoid valve bolt to 7-9 Nm (62-79 inch lbs.).
16. Align the oil filter and install valve body bolts d. Tighten valve body bolts to 7-9 Nm (62-79 inch lbs.).
17. Install valve body bolts a and valve body nuts f. Tighten valve body bolts and reamer bolts to 7-9 Nm (62-79 inch lbs.)
NOTE: To tighten reamer bolts, hold valve body nuts f in place.