Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
13. Install the front axle wheel hub retainer. Tighten the front axle wheel hub retainer to 235-314 Nm (174-231 ft. lbs.).
14. Install a new cotter pin.
15. Install the front disc brake rotor.
16. Remove the mechanic's wire from the disc brake caliper and install the disc brake caliper on the front wheel knuckle.
17. If removed, install the steering stop bolt, aligning the match marks made during removal. Tighten the steering stop bolt jam nut to 78-98 Nm
(58-72 ft. lbs.).
18. Install the wheel and tire assembly. Tighten the lug nuts to 98-118 Nm (72-87 ft. lbs.).
19. Lower the vehicle.
