Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Power Window Motor: Testing and Inspection
Window Regulator Electric Drive
1. Key OFF.
2. Disconnect the window regulator electric drive connector in question.
3. Using jumpers, connect one of the terminals on the window regulator electric drive to the battery positive terminal. Connect the other terminal on
the window regulator electric drive to the battery negative terminal.
4. Reverse the jumpers on the window regulator electric drive.
5. The window will move in one direction (down or up) when battery voltage is supplied. When battery voltage is reversed, the window regulator
electric drive operates the window in the opposite direction.
6. If the window regulator electric drive does not operate as specified, replace the window regulator electric drive. Otherwise, return to Pinpoint
Tests. See: Testing and Inspection/Pinpoint Tests