Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
10. Disconnect the washer hoses from the windshield washer pump and the rear window washer pump on the windshield washer reservoir.
NOTE: The rear window washer hose end is color-coded, matching the connector on the rear window washer pump. Match the colors to ensure
proper installation.
11. Loosen the two windshield washer reservoir side bolts.
12. Remove the windshield washer reservoir by sliding it out of the side slots.
13. Remove the windshield washer pump.
INSTALLATION
1. To install, reverse the removal procedure.
2. Tighten the lug nuts to 98-118 Nm (72-87 Lb Ft).