Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Wiper Arm: Service and Repair
Windshield Wiper Arm
REMOVAL
1. Place the windshield wiper pivot arm and windshield wiper blade assembly in an upright position, away from the windshield glass.
2. Slide the lock tab out and away from the bottom of the windshield wiper pivot arm.
3. Pull up and remove the windshield wiper pivot arm.
INSTALLATION
NOTE: The LH and RH windshield wiper pivot arms are not interchangeable. The passenger side windshield wiper pivot arm is longer than the driver
side windshield wiper pivot arm. The windshield wiper pivot arms are marked on the middle of the back side with a "D" for the driver side and an "A"
for the passenger side.
1. To install, reverse the removal procedure.