Villager V6-201 3.3L SOHC VIN T SFI (1999)
Front Door Interior Handle: Service and Repair
REMOVAL
1. Remove the front door trim panel.
2. Remove the door trim panel support bracket.
1
Remove the bolts.
2
Remove the door trim panel support bracket.
3. Position the watershield aside.
4. Unlock the interior door handle rod guide.
5. Remove the interior door handle.
1
Remove the screw.
2
Move the interior door handle aside by sliding rearward.
3
Disconnect the actuating rods.
INSTALLATION
1. To install, reverse the removal procedure.