Villager V6-201 3.3L SOHC VIN T SFI (1999)
3. Using the special tool, remove the safety belt anchor bolt.
^
Position the safety belt anchor bolt cover aside.
4. Remove the lower B-pillar trim panel.
^
Disconnect the pin-type retainers.
^
Disconnect the electrical connector.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Position the door opening weatherstrip over the B-pillar lower trim panel.
Upper
REMOVAL
1. Remove the B-pillar lower trim panel.
2. Open the D-ring cover.