Villager V6-201 3.3L SOHC VIN T SFI (1999)
8.
If the vehicle is a 1999 or 2000 model year check the build date code on the Power Window Switch to confirm that it has a date code of 9186
(199"9" "186"th day = July 3, 1999) or later (See Figure 3). If the date code is 9186 or later, DO NOT REPLACE THE SWITCH and proceed to
Step 9. If the date code is 9185 or earlier, remove and replace the Power Window Switch (refer to parts block at the end of this article).
NOTE
DATE CODE EXPLANATION FOR 9186 DATE CODE: 199"9" "186"TH DAY (JULY 3, 1999). THE FIRST NUMBER REPRESENTS THE
YEAR PRODUCED. THE NEXT THREE NUMBERS REPRESENT THE DAY OF THAT YEAR THE PART IS PRODUCED.
9.
If vehicle is equipped with optional anti-theft OR vehicle build date is after 4/1/1999, proceed to Step 11. If vehicle is NOT equipped with
anti-theft AND build date is 4/1/1999 or earlier, check for a possible open 4-pin gray harness connector with three (3) wires (RD, RD/BK, and
BK) inside the front door (Figure 4).
10.
If found, remove and discard the connector by cutting the wires, then seal the exposed ends with heat-shrink tubing.
