Villager V6-201 3.3L SOHC VIN T SFI (1999)
Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir
Removal
1. Disconnect the brake fluid level switch electrical connector.
2. Remove the brake master cylinder reservoir bolts.
3. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.
Remove the brake master cylinder reservoir.
1
Loosen the clamps and disconnect the brake master cylinder reservoir hoses from the brake master cylinder reservoir.
2
Remove the brake master cylinder reservoir.
Installation
