Villager V6-201 3.3L SOHC VIN T SFI (1999)
Intake Manifold: Service and Repair
Lower
Removal
CAUTION: If replacing the intake manifold with a new one, the cylinder head gasket must also be replaced.
1. Relieve the fuel system pressure.
2. Remove the upper intake manifold.
3. Disconnect the electrical connectors.
1. Disconnect the fuel injector electrical connectors.
2. Disconnect the Engine Coolant Temperature (ECT) sensor electrical connector.
4. Remove the ground wire bolts.
5. Disconnect the heated oxygen sensor electrical connector.
1. Unclip the wire harness from the bracket.
2. Disconnect the HO2S electrical connector.