Villager V6-201 3.3L SOHC VIN T SFI (1999)
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before disconnecting any of the
fuel lines or fuel system components, the fuel system pressure must be relieved.
Disconnect the fuel lines.
1. Remove the bolts.
2. Loosen the clamp.
3. Disconnect the fuel lines.
10. CAUTION: Make sure the fuel injection supply manifold insulators are removed with the fuel injection supply manifold.
Remove the fuel injection supply manifold and insulators.
1. Remove the bolts.
2. Remove the fuel injection supply manifold and insulators.
11. Position the upper radiator hose aside.
1. Remove the bolt.
2. Release the clamp.
3. Position the upper radiator hose aside.
12. Remove the upper timing belt cover bolt.