Villager V6-201 3.3L SOHC VIN T SFI (1999)
Intake Manifold: Service and Repair
Upper Intake Manifold
Removal
1. Drain the engine cooling system.
2. Remove the air cleaner outlet tube.
3. Disconnect the electrical connectors.
-
Disconnect the MAP/BARO sensor.
-
Disconnect the MAP/BARO solenoid.
4. Disconnect the electrical connectors.
-
Disconnect the Throttle Position Sensor (TPS) electrical connector.
-
Disconnect the Throttle Position (TP) switch electrical connector.
-
Disconnect the Idle Speed Control (ISC) electrical connector.
5. Disconnect the coolant hose.
1. Release the clamp
2. Disconnect the coolant hose.