Villager V6-201 3.3L SOHC VIN T SFI (1999)
12. Install the exhaust heat shield.
1. Position the exhaust heat shield.
2. Install the bolts.
13. Install the battery junction box.
1. Position and clip the battery junction box into place.
2. Install the bolts.
14. Install the air cleaner - assembly.
15. Connect the battery junction box electrical connectors.
16. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
Connect the battery ground cable.