Villager V6-201 3.3L SOHC VIN T SFI (1999)
2. Install the O-ring seal.
-
Lubricate the O-ring seal with PAG Compressor Oil (R-134a Systems) F7AZ-19589-DA (MC YN-12-C) meeting Ford specification
WSH-M1C231-B.
CAUTION: Use only new purple O-rings. The use of any O-ring seals other than specified may result in intermittent leakage during vehicle
operation.
3. Lubricate the inside of the fittings with PAG Compressor Oil (R-134a Systems) F7AZ-19589-DA (MC YN-12-C) meeting Ford specification
WSH-M1C231-B.
4. Assemble the male and female fittings together.
NOTE: When properly assembled, the male and female fittings should be flush.
