Villager V6-201 3.3L SOHC VIN T SFI (1999)
Hose/Line HVAC: Service and Repair
Auxiliary A/C Evaporator Outlet and Inlet to Expansion Valve
REMOVAL
1. Discharge and recover the refrigerant. See: Service and Repair/Refrigerant Recovery
2. Raise and support the vehicle.
3. Remove the A/C evaporator inlet and outlet lines cover.
1
Remove the pin-type retainers.
2
Remove the cover.
4. Disconnect the A/C evaporator inlet and outlet lines.
1
Remove the A/C fittings.
2
Disconnect the lines.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
5. Lower the vehicle.
6. Remove the lower RH rear quarter trim panel.
7. Disconnect the A/C evaporator lines from the A/C spring lock coupling.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.