Villager V6-201 3.3L SOHC VIN T SFI (1999)
5. Remove the A/C suction accumulator bracket clamp bolt and, if equipped, the rear A/C line bracket nut.
CAUTION: Use a back-up wrench to prevent damage to the tubes.
6. Using the special tool, disconnect the A/C evaporator core outlet line spring lock coupling.
7. Remove the speed control servo.
1
Remove the screws.
2
Remove the nuts.
3
Remove the speed control servo.
8. Position aside the radiator coolant reservoir.
-
Remove the two screws.