Villager V6-201 3.3L SOHC VIN T SFI (1999)
Hazard Warning Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Position the hazard warning flasher switch aside.
3. Remove the hazard warning flasher switch.
1
Disconnect the connector.
2
Remove the hazard warning flasher switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.