Villager V6-201 3.3L SOHC VIN T SFI (1999)
^
The differential ring gear backlash is correct, a thinner drive pinion shim is needed. A decrease will move the drive pinion toward the
differential ring gear.
9.
A high, thin contact pattern that is worn toward the toe.
^
Tooth contact pattern shown on the drive side of the gear teeth.
^
The drive pinion depth is correct. Increase the differential ring gear backlash.
10.
A contact pattern that is worn in the center of the differential ring gear tooth toward the heel.
^
Tooth contact pattern shown on the drive side of the gear teeth.
^
The low contact pattern indicates that the drive pinion is installed too deep into the carrier.
^
The differential ring gear backlash is correct. A thicker drive pinion shim is needed.
11.
A contact pattern that is worn at the top of the differential ring gear tooth toward the heel.
^
Tooth contact pattern shown on the drive side of the gear teeth.