Villager V6-201 3.3L SOHC VIN T SFI (1999)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Switch Lock Cylinder-Non-Functional Lock
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the upper and lower steering column shroud,
^
Remove the steering column shroud screws.
3. Remove the ignition lock bolts by grooving the heads of the break-away bolts with a hammer and chisel.
4. Remove the key-in-reminder switch.
^
Remove the two screws.
5. Remove the ignition switch lock cylinder.