Villager V6-201 3.3L SOHC VIN T SFI (1999)
Power Steering Line/Hose: Service and Repair
Hose-Junction Block to Pump
REMOVAL
1. Raise and support the vehicle.
2. Remove the power steering high pressure hose from the power steering pump.
1
Remove the power steering high pressure hose connecting bolt.
2
Remove the power steering high pressure hose.
3. Remove the power steering high pressure hose from the power steering junction block.
4. Remove the power steering junction block.
1
Remove the junction block bolts.
2
Remove the junction block and hose.
INSTALLATION