Villager V6-201 3.3L SOHC VIN T SFI (1999)
2. If equipped, position the Anti-Lock Brake (ABS) sensor out of the way.
1
Remove the ABS sensor bolt.
2
Position the sensor out of the way.
3. Separate the tie rod end from the wheel knuckle.
1
Remove the cotter pin.
2
Remove the nut.
3
Using special tool, separate the tie rod end from the wheel knuckle.
4. Separate the suspension lower ball joint from the knuckle.
1
Remove the cotter pin.
2
Remove the nut.
3
Separate the suspension lower ball joint from the wheel knuckle.
5. Separate the axle hub from the wheel knuckle.