Villager V6-201 3.3L SOHC VIN T SFI (1999)
Fluid Line/Hose: Service and Repair
Removal
1. NOTE: Place a drain pan under the fluid cooler inlet hose.
Disconnect the upper hose clamp.
2. Raise and support the vehicle.
3. Remove the lower splash shield.
4. Disconnect the lower hose clamp.
5. Remove the inlet tube from the tank.
6. Disconnect the clamps and remove the outlet tube.
Installation
1. NOTE: After installation, check fluid level.
To install, reverse the removal procedure.