Cooper (R50) L4-1.6L (W10) (2002)
PARTS INFORMATION
PROCEDURE
A.
CD CHANGER PREPARATION:
Transport Locks are installed on the bottom of the CD changer to protect the unit during shipment. Prior to installation, make sure you remove the
transport locks and cover the holes with the supplied adhesive seals as described below.
1.
Remove the 3 transport locks from the bottom of the CD changer. Replace locks only if a unit needs to be returned for an exchange
2.
Cover the holes where the transport locks were installed with the 3 adhesive seals (1) supplied with the unit.