Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-2301001.png)
Windshield Moulding / Trim: Service and Repair
51 31 045 Removing And Installing/Replacing Trim On A-pillar, Left Or Right
Important: After cementing the windscreen, at least 6 hours must be allowed to elapse before fitting the A-pillar trim covers (windscreen
breakage).
Release door seal in A-pillar area.
Release screws (1 and 2).
Unclip trim (starting at bottom) in direction of arrow.
Installation:
Trim for A-pillar:
-
must be behind lower trim strip of windscreen
-
must not be damaged, replace if necessary
If necessary, release clips (2) from A-pillar (1).
Clips (2) and shaped part (3) must not be damaged.
Build date up to 09/2003:
Retrofit shaped part (3).
