Cooper (R50) L4-1.6L (W10) (2002)
Release trim for door pillar.
Installation: Fit door seal correctly.
Feed out strap (1) and remove trim (2).
Important:
In event of incorrect fitting:
-
Adjusting lever (1) breaks
-
Adjusting lever (1) drops into belt case
-
Seat belt blocked
-
Rattling noises occur
Installation: Adjusting lever (1) of trim (2) must be at same height as belt height adjuster (4).
When installing, insert adjusting lever (1) correctly into mounting (3) of belt height adjuster (4).