Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-2413001.png)
Seat Heater: Customer Interest
A/C - Seat Heaters Too Hot or Too Cold
SI M 61 01 04
General Electrical Systems
October 2006
Technical Service
This Service Information bulletin supersedes S.I. M61 01 04 dated March 2004.
[NEW]designates changes to this revision
SUBJECT
Seat Heaters Too Hot or Too Cold
MODEL
[NEW] R50 (Cooper), R53 (Cooper S) produced up to 3/2004
SITUATION
Some owners may complain that their seat heaters get too hot, or they don't get hot enough.
CORRECTION
In case of a customer complaint, install an adapter cable to increase or reduce heat output, as required.
PROCEDURE
Adjust the seat to the full forward, full up position, and fold the backrest forward.
Locate and disconnect the white connector for the seat heater (1).
Install adapter cable (1) into existing harness (2).
